[Help] loose head

[central206lax]

i play middie and after all the beatings my stick has taken the head is becoming loose and wobbling. i have put in new screws, and have tightened the screws, but nothing lasts. any tips or tricks?

[m2daRizzle]

put a layer of tape on the shaft and then put the head on top of it. that should get rid of the wobble. Im pretty sure there are threads on this already. If you search im sure you will find some threads full of tips.

[lacrosseman192]

Scotch tape is what i use, you'll need a good amount of it. I use it because if you use athletic tape after a while it will make it extremely hard for you to get the head off the shaft but that dosen't happen if you use the scotch tape. The only problem with the scotch tape is that it gets ridiculously hard to get off the shaft once its been on for a while

[neuf]

masking tape works well.

[TigerLax29]

Electric tape works the best for me. To make it easier wrap the tape parallel with the shaft and into the inside of the shaft.

[killerboots8]

i have two views on this but first i put a vertical line or two of athletic tape on the back covering the screw hole that way if the head is just to large for the shaft itll fit better or if the screw hole is too wide the screw will stay better...secondly if you are using a warrior head(i dont know about all but it happened to my old evo half way through last season) check the back of the head because the plastic broke clean where the throat meets the head and that my friend is annoying and unfortunately unfixable

[min_sarker]

im pretty sure you could try to just drill a new whole

or the tape idea will work