Is This Normal?

[Radioactive Ape]

As some of you know (from my thread), I got a Warrior Revolution with a Warrior C405 handle. However, there is one problem. I play attack, and when putting my head on the shaft, it wouldn't go down to the second hole to the attack position. Is this what Revo's just do? Does anyone else have this problem? If this is not normal can someone else help me out by telling me what i should do? Thanks for your help in advance.

[DrDetroit]

is what normal? is it normal to be a radioactive ape? no, i dont think so...

[Radioactive Ape]

if you read it you would realize that i was asking if the revo not going two holes down was normal.

[Longest]

Doc, try and be helpful please

Ape: Just drill a new hole in the shaft. Push the Revo down as far as it can go, then get a drill and drill out a shaft of the correct size. This is a common issue. (Note: If under 18, get parents permission. Supervision recommended. I'm not liable for injuries or damages.)

Dan

[Radioactive Ape]

that would be hard to do because when i push the head all the way down i can see about half of the last hole. if i drilled from there, i would just have one big hole and the head would kind of slide around. thanks for helping though

[lacrossefreak]

or you could just drill a new hole on the other side of the shaft... hmmm lets think here... i cant get it on one side... so just go to the other Dude! sorry for being mean... its late and i cant sleep because these new meds are freaking me out.... nah i was lying im not on meds.... but i cant sleep... just drill a hole on the other side dude

[Longest]

As was pointed out, turn the shaft around.

Dan

[Radioactive Ape]

thanks, ya it is late here too and i am messed up from tylenol, i slammed my tailbone today so i took a LOT of tylenol, thanks d00ds.

[onlyliving4lax]

or jsut tape it.

[FarmerLax19]

yeah tape works too...

[xSURFERx]

tape does work but if u can drill, drill

[26Easy]

I think you need more then tape.I tried that at a over night camp I was at cause I had traded a for a shaft and there were no holes so I taped it and it would just keep falling off.

[brlacrosse50]

if you dont want to drill a hole you can just not push the head down all the way. just push it down to the hole and screw it in, and that should hold it

[chris3234]

Just drill a new hole or get a different head