[Tutorial] Double Sidewall the Orange Way

[Orange]

There are different ways of stringing double sidewall. I, along with others, find the way I'm about to show you successful and good looking (we all know looks do count).

To start off, some use sidewall string for the sidewalls, some use crosslace, some use both. I use crosslace. I'm using the colors white and orange instead of all white because the orange is a bright color so you won't get confused with which sidewall string is which. I'm basically going to show you how to string a whole stick because I'll do the procedures for the top string and everything.

By the way, if you didn't know yet I'm warrior42.

Materials

lacrosse head
piece of hard mesh thoroughly stretched out
33" top string
two 21" pieces of crosslace for first sidewall
two 27" pieces of crosslace for second sidewall
11" bottom string
lighter (be careful)
scissors (be careful too... you never know)

http://img230.echo.cx/img230/6596/picture0013sf.th.jpg (http://img230.echo.cx/my.php?image=picture0013sf.jpg)

(all measures above are EXTRA legnths than what the finish product will need because cutting extra is good, you won't want to cut the string too short then go back and do it all over again)

Procedures

1. Top String

http://img230.echo.cx/img230/7002/picture0063tw.th.jpg (http://img230.echo.cx/my.php?image=picture0063tw.jpg)
Fold the mesh over like shown in above picture.

http://img230.echo.cx/img230/2913/picture0022io.th.jpg (http://img230.echo.cx/my.php?image=picture0022io.jpg)
Put the string through the top hole on the head.

http://img230.echo.cx/img230/2662/picture0035ol.th.jpg (http://img230.echo.cx/my.php?image=picture0035ol.jpg)
Put the top string through the first diamond in the folded row of diamonds.

http://img230.echo.cx/img230/7346/picture0049ys.th.jpg (http://img230.echo.cx/my.php?image=picture0049ys.jpg)
Put the string back through the same hole it's already in.

http://img230.echo.cx/img230/2594/picture0059ug.th.jpg (http://img230.echo.cx/my.php?image=picture0059ug.jpg)
Tie the end of the string then pull the other end so it is as tight as can be.

You have now successfully tied the string to your head.

[Orange]

http://img128.echo.cx/img128/7733/picture0072ue.th.jpg (http://img128.echo.cx/my.php?image=picture0072ue.jpg)
Put the string through the first hole on the scoop.

http://img128.echo.cx/img128/7393/picture0087it.th.jpg (http://img128.echo.cx/my.php?image=picture0087it.jpg)
Put the string through the second diamond on the folded row of the mesh.

http://img263.echo.cx/img263/7656/picture0086hb.th.jpg (http://img263.echo.cx/my.php?image=picture0086hb.jpg)
Pull it across as shown in above picture.

http://img263.echo.cx/img263/8552/picture0107mf.th.jpg (http://img263.echo.cx/my.php?image=picture0107mf.jpg)
Put string through third diamond then around into the scoop hole.

http://img263.echo.cx/img263/3769/picture0117rk.th.jpg (http://img263.echo.cx/my.php?image=picture0117rk.jpg)
Put string under the loop that was created so it looks like the picture above.

Apply the same method to the second, third, and fourth scoop holes.

http://img9.echo.cx/img9/3057/picture0127yy.th.jpg (http://img9.echo.cx/my.php?image=picture0127yy.jpg)
http://img9.echo.cx/img9/4171/picture0131oq.th.jpg (http://img9.echo.cx/my.php?image=picture0131oq.jpg)
http://img153.echo.cx/img153/9687/picture0156fv.th.jpg (http://img153.echo.cx/my.php?image=picture0156fv.jpg)
Finish off the top string by tying it the way you did when started.

[Orange]

2. First (inner) Sidewall String

http://img269.echo.cx/img269/1761/picture0163ku.th.jpg (http://img269.echo.cx/my.php?image=picture0163ku.jpg)
http://img96.echo.cx/img96/5742/picture0173wh.th.jpg (http://img96.echo.cx/my.php?image=picture0173wh.jpg)
Since I use crosslace and it is skinnier than sidewall string, you are going to want to start by knotting the string as shown above.

http://img96.echo.cx/img96/3313/picture0181kj.th.jpg (http://img96.echo.cx/my.php?image=picture0181kj.jpg)
Put the crosslace through the second sidewall hole. Make sure there is one empty one above it.

http://img96.echo.cx/img96/9159/picture0196zf.th.jpg (http://img96.echo.cx/my.php?image=picture0196zf.jpg)
Put the crosslace through the next sidewall hole and then over so it looks like it does above.

http://img96.echo.cx/img96/6034/picture0203ok1.th.jpg (http://img96.echo.cx/my.php?image=picture0203ok1.jpg)
http://img256.echo.cx/img256/573/picture0212pe.th.jpg (http://img256.echo.cx/my.php?image=picture0212pe.jpg)
Do the same thing to the next sidewall hole, as to the rest of them so it looks like the above pictures. Remember to string them as tight as you can, I only had them a little lose in the pictures so it would be easy to follow the string clearly.

Tie the end off in the second to last sidewall hole.

You have now completed the first inner sidewall. Apply the same method to the other sidewall and make sure you do it SYMMETRICALLY.

[Orange]

3. Second (outer attached) Sidewall

http://img256.echo.cx/img256/4962/picture0221xd.th.jpg (http://img256.echo.cx/my.php?image=picture0221xd.jpg)
Put a lighter over the end of the piece of crosslace that you will use. This creates sort of a "tipped" string so it's easy to apply it through the inner sidewall.

http://img176.echo.cx/img176/8769/picture0236em.th.jpg (http://img176.echo.cx/my.php?image=picture0236em.jpg)
Knot the end the same way you did to the first sidewall. Put the crosslace through the top open sidewall hole and then through the top of the diamond of the mesh.

http://img176.echo.cx/img176/5975/picture0242hb.th.jpg (http://img176.echo.cx/my.php?image=picture0242hb.jpg)
Put the tipped end of the crosslace through the top sidewall string as shown above.

http://img36.echo.cx/img36/2994/picture0265sv.th.jpg (http://img36.echo.cx/my.php?image=picture0265sv.jpg)
http://img36.echo.cx/img36/6679/picture0273mu.th.jpg (http://img36.echo.cx/my.php?image=picture0273mu.jpg)
Bring the tipped end back around and then put it under the SAME diamond so it looks like the second picture (sorry for the bad quality).

[Orange]

http://img36.echo.cx/img36/9844/picture0285ha.th.jpg (http://img36.echo.cx/my.php?image=picture0285ha.jpg)
http://img31.echo.cx/img31/7883/picture0294kn.th.jpg (http://img31.echo.cx/my.php?image=picture0294kn.jpg)
Put the string through the next diamond and then through the next sidewall string.

http://img31.echo.cx/img31/9185/picture0308xx.th.jpg (http://img31.echo.cx/my.php?image=picture0308xx.jpg)
Bring the tipped end back up after going through the sidewall.

http://img31.echo.cx/img31/7854/picture0313pc.th.jpg (http://img31.echo.cx/my.php?image=picture0313pc.jpg)
Remember you want these as tight as possible.

http://img31.echo.cx/img31/6928/picture0267gl.th.jpg (http://img31.echo.cx/my.php?image=picture0267gl.jpg)
http://img31.echo.cx/img31/339/picture0332il.th.jpg (http://img31.echo.cx/my.php?image=picture0332il.jpg)
Bring the tipped end back up through the same diamond like you did before and make it nice and tight.

http://img77.echo.cx/img77/2482/picture0348cc.th.jpg (http://img77.echo.cx/my.php?image=picture0348cc.jpg)
Notice in this picture there are two diamonds in the one sidewall length. Doing this in certain places will deepen your pocket in that area, so where ever you want to double up it will be easier to form your pocket in that area.

http://img280.echo.cx/img280/3112/picture0386tk.th.jpg (http://img280.echo.cx/my.php?image=picture0386tk.jpg)
When you get to the last sidewall spot, do the same to the diamond and then tie the knot in the remaining sidewall hole.

http://img280.echo.cx/img280/7770/picture0397xr.th.jpg (http://img280.echo.cx/my.php?image=picture0397xr.jpg)
The finished sidewall should look like this.

Now you are ready to do it to the next side. Make sure you do it exactly like you did for the first so it stays SYMMETRICAL.

[Orange]

4. Bottom String

The bottom string doesn't have to be done this way, but it's a pretty common way.

http://img280.echo.cx/img280/4641/picture0401az.th.jpg (http://img280.echo.cx/my.php?image=picture0401az.jpg)
Put the bottom string through the first hole on the bottom of the head.

http://img280.echo.cx/img280/9386/picture0410co.th.jpg (http://img280.echo.cx/my.php?image=picture0410co.jpg)
Put the string through the third diamond in the row of diamonds that is not attached to the sidewall then skip a diamond put it back through the next as shown above.

http://img82.echo.cx/img82/4463/picture0423zy.th.jpg (http://img82.echo.cx/my.php?image=picture0423zy.jpg)
Put the string through the next bottom hole then back through the third bottom hole.

http://img82.echo.cx/img82/355/picture0435kr.th.jpg (http://img82.echo.cx/my.php?image=picture0435kr.jpg)
Put the string through the next diamond and skip another one before putting the string back through.

http://img82.echo.cx/img82/7743/picture0442jg.th.jpg (http://img82.echo.cx/my.php?image=picture0442jg.jpg)
Put the string through the last bottom hole and tie it off.

The bottom string is now complete.

[Orange]

5. The Finished Product

http://img288.echo.cx/img288/5587/picture0456se.th.jpg (http://img288.echo.cx/my.php?image=picture0456se.jpg)

http://img288.echo.cx/img288/7484/picture0462sa.th.jpg (http://img288.echo.cx/my.php?image=picture0462sa.jpg)

http://img288.echo.cx/img288/5434/picture0485ok.th.jpg (http://img288.echo.cx/my.php?image=picture0485ok.jpg)

Congratulations! You have just strung a pocket with double sidewalls!

[joeyp2003]

that looks great nice job done with the orange sidewall makes it alot easier to do....p.s. i love your hands

[lax_crazy027]

yes it is very nice, just wondering will it stretch to become illegal? because thats my only gripe with double sidwalls when i string them.

[Orange]

that looks great nice job done with the orange sidewall makes it alot easier to do....p.s. i love your hands
Thanks but I was thinking they looked kinda fat. Now my deformed thumb nail from being slammed in a van door has been revieled...
yes it is very nice, just wondering will it stretch to become illegal? because thats my only gripe with double sidwalls when i string them.
Many sticks become illegal over time so you would just have to maintain the bottom string and if it got really bad you may have to redo the sidewalls to make them tighter. I'm always restringing my sticks though so I usually don't care about that factor.

[LeftySniper]

probably not, if you really string it as tight as possible and dont loosten it up like some n00b who wants a big pocket then it wont. i string doubles all the time and have no problme making it legal or illegal if i want.

[brett95lax]

Is there any specific reason that you put the shooters in first?

[Orange]

Is there any specific reason that you put the shooters in first?
That mesh was already in the profile but strung differently so I just left them in.

If anyone tries to string like this I would like to see pictures of it, so post them.

[cloo24]

what i do instead of that is string the first like 3 holes of the mesh to the head with the 1st sidewall and then follow the rest of your step. I do it because it keep you from having alot of whip or lip or whatver

[mustang_lax]

I'm going to string my bionic with double sidewall except with 5D. I'll get pics up tonight

[mclax]

is there any way you could show how to do the double sidewall on a custom pocket?

[HRodLAX]

not that i'm jelous or anything but this is sweet, we have 3 ways to string double sidewalls in one day. Yea.

[Orange]

not that i'm jelous or anything but this is sweet, we have 3 ways to string double sidewalls in one day. Yea.
Elementsk8ers was really old and he admitted to messing up on it so he edited his I think. Yours is a different way anyway.

[auburnfan2015]

I had some catapultion on my Razer that had become too soft, so I just took a free piece of Jimalax 10d I had laying around and strung it like this. I'll get some pictures tomorrow but the sidewalls are both white and it's hard to see but it throws great and the pocket is great too. Thanks Orange! I've been trying to figure out how you string your style of a pocket for a while.

[laxmid20]

I've been trying to figure out how to string a double sidewall like that for a while and this is the BEST tutorial I've seen for it. Thanks alot. I was wondering how you stretch the mesh before you string. what method you use? Thanks for the tutorial, I will put it to use very soon.

[laxboyjt91]

how do u get ur pockets so deep do u use a pocket stretcher

[CuseLax18]

Um, you strech it with your hands...

EDIT: To Laxmid

[laxoholic]

I have been waiting for this for ever. thanks man i'm gonna string one of my heads like that that is sweet.

[mustang_lax]

double sidewall with 5D..check it out :grin:

oh...and yeah...its got whip :drool:

http://img238.echo.cx/img238/3522/bionicds0ld.th.jpg (http://img238.echo.cx/my.php?image=bionicds0ld.jpg)

http://img238.echo.cx/img238/3332/bionicds21bo.th.jpg (http://img238.echo.cx/my.php?image=bionicds21bo.jpg)

[LeftySniper]

holy macerole!

[ViennaLAX16]

good job you definitly did it the right way.

[lax_crazy027]

oh my gosh, thats ginormous. i love the pocket on that thing, and does it have a bottum string yet?

[LCNlaxman]

Dang, maybe i should do my OWN double sidewall tutorial. No one so far has strung them like i do.

[mustang_lax]

no I haven't put one in yet. I didn't have any string left so I i just took pics without it. I cut down the excess string and tied it in though.

[Orange]

Dang, maybe i should do my OWN double sidewall tutorial. No one so far has strung them like i do.
I string it the way Lax Factory does. Supposedly the person from there invented double sidewall but I don't know the truth or background to it.

Mustang is that the piece of 5D mesh I gave you a while ago?

[mustang_lax]

no It's an extra piece I had laying around. The one you gave me I strung on a friends Triton. The pocket came out pretty big too.

[Ghslongpole14]

Holy Moses! No offense man, but I can't say I care too much for those pockets (Mustang.) And they can't be legal.

Orange: Thanks for the tut. I know i PMed you about your stringing, but now I know how to do the double. I just never sit down to actually string a damn stick.

[mustang_lax]

Holy Moses! No offense man, but I can't say I care too much for those pockets (Mustang.) And they can't be legal.

Oh but they are! Looks can be decieving

[Orange]

Oh but they are. Looks can be decieving.
Yeah they can be. People are ALWAYS either IMing me, PMing me, or just asking me in person if my 5D sticks are legal. They never believe me. Team mates are always checking my stick.

http://img206.echo.cx/img206/9051/10606947ie.th.jpg (http://img206.echo.cx/my.php?image=10606947ie.jpg)
Double Sidewall Evo Pro with 5D

[mustang_lax]

right now I'm working on stringing double sidewall 6D on my brother's evo. pics to come

[auburnfan2015]

Once my Matrix comes I'm going to be stringing it with some 6d and douuble sidewall the Orange way. Do you stretch the mesh by itself or do you use water, conditioner, shampoo, or something else? Thanks

[Orange]

I stretch it by itself with my hands unless it's a bad batch, then you're on your own.

[TitanLax]

do any of u recommend which sidewall to do as crosslace if u do only one crosslace and one sidewall?
thanx

[Lacrosstitute]

Mustang......... that's rediculous.

[brett95lax]

Orange wanted me to post pictures of my double sidewalls his way so here they are:

http://img30.echo.cx/img30/7826/dsc004203ti.th.jpg (http://img30.echo.cx/my.php?image=dsc004203ti.jpg)

http://img30.echo.cx/img30/4000/dsc004219wo.th.jpg (http://img30.echo.cx/my.php?image=dsc004219wo.jpg)

[Orange]

That's a big pocket. Looks pretty good just at the end of the sidewall the strings seem all weird and bunched up.

[rebellax]

yeah uhhhhh
my double sidewalls always come out being really really really illegal, i had it with 6 diamond and i can never get it to throw consistantly...... can anyone tell me where i should put my shooting strings for it

[goaliedude13]

:clap: :clap: :clap: :clap: :clap: Awesome re-strung a sidewall last night ti try it out. Wow so easy to understand.

[PhishMeister]

i got 2 dbl sidewalls done...one approved by orange...wen he first saw it the first thing he said was..."u didnt string this" it is the answer and the other one is the cyber...if my camera wasnt the worst in the worls...id post pics

[lacrossefanatic]

Wow we have so many tutorials, I don't think we should just let them fly by we should make them as stickies or just have a tutorial section on this forum where only approved tutorials can go. I guess I should write that in the forum guidlines,news and suggestion category.

[Orange]

There's already a Sticky in Stick Tech called "Tutorial List," and believe it or not it's a list of all the tutorials.

[Warrior]

I just strung up a rotor with double sidewall...

http://community.webshots.com/album/382995244IIkztv?534

[SWIMMOVE]

whats the point of doing a doubble sidewall...?

[Tman188]

Orange, why do you string your mesh with the shooting strings already in it?? Is there an advantage by doing it this way??

[Orange]

Orange, why do you string your mesh with the shooting strings already in it?? Is there an advantage by doing it this way??
How come no one reads? I already said in the first post that the shooting strings are in the mesh already because I took the mesh out of another stick.

[tbsundae899]

:bye: Is this an easy pocket for a first time stringer

[Orange]

If you follow the pictures than it will be easy.

[tbsundae899]

is it easy to start out with 5d

[lax_crazy027]

if you can do the top string, 5d is real easy and is great mesh

[tbsundae899]

if you can do the top string, 5d is real easy and is great mesh


is the top string hard to string

[lax_crazy027]

not if you follow the same principles as hard mesh

[allyearlax]

hey can i string a double sidewall with heads that have alot of holes such as a razer or a torque? and if so, could someone explain how many holes to skip and etc.

[Orange]

Well first of all, the Razer doesn't have many sidewall holes at all, which is what I personally like about it. The Profile actually has one more sidewall hole than the Razer.

If you wanted to try this on a Torque, it's doable. I would say skip every other sidewall hole when stringing the first sidewall. If that doesn't fit your likings, than you can just redo it however you prefer because of the multiple holes on the Torque.

[slice n dice]

How do you make your pockets so deep like that, mine are all shallow and crappy.

[laxer41]

Those are the best double sidewalls I have ever seen

[cwk132]

i love the bag u can get with double sidewalls

[laxer41]

I love it even more, believe me.

[cwk132]

oh i do

extrawords

[laxer41]

ur gay, extrawords.

[PhishMeister]

wow stop fighting u little girls

[laxer41]

I am not a little girl, I repeat, I am not a little girl. and do not involve yourself im my business.

[RedStormLaxer41]

hmmm i agree with phishmeister

and honestly, if you stretch your mesh out like youre sposed to, double sidewalls are pointless, you can get just as big of a bag with a single sidewall

[st1acrosse99]

wow, you two are def going out..this is the 3rd thread that ive seen you guys post together in

[PhishMeister]

ur not a little girl ? seems to me like ur crying about it again...or crying about something...so dry ur tears let ur balls drop and grow up

[laxer41]

going out... to eat?

[PhishMeister]

each other ? idk thats just what i heard

[Orange]

All of you shut up. Stop ruining a beautiful tutorial.

[slice n dice]

Lol, hey how do you get your pockets so baggy like that, I put some new 7d on my bionic and its horrible. Its really shallow. I followed the pics and whatever but I can't get it right...

[PhishMeister]

stretch ur mesh out first ? and break the pocket in

[slice n dice]

Yeah, I stretched it out and tried to break it in but I'm too lazy so I threw my old 10d back on it and used the GIANT pocket tutorial and its the most beautiful pocket I've ever strung. *tear*

[-hOtSiZzLe-]

i will definitly post pics once my Truth and my jimalax crap gets here...agggggh im goin crazy i cant wait for it to come

[MoOnCoW]

man, i just "tryed to string one, it looks like it was made by a tree, its screwed up...

[TAITERSALAD31]

can you throw with that thing????



double sidewall with 5D..check it out :grin:

oh...and yeah...its got whip :drool:

http://img238.echo.cx/img238/3522/bionicds0ld.th.jpg (http://img238.echo.cx/my.php?image=bionicds0ld.jpg)

http://img238.echo.cx/img238/3332/bionicds21bo.th.jpg (http://img238.echo.cx/my.php?image=bionicds21bo.jpg)

[canadalax22]

im betting it is for some support

[D Bay]

im betting it is for some support
:dummy: it's for pocket placement! That's been said many times

[crazydrew86]

that looks sick

[krantz]

Is that 10d hard mesh? I like this tutorial I think I'm going to do it as my first string job ever

[maroon]

Thank You Orange this Info is very useful for me.

[laxpred]

good work, i laways use double sidewalls with my 7 diamond pockets, it helps break it in.

[gigo567]

I have gotten used to doing double sidewalls your way Orange.

[Riot]

Thanks, this is really helpful. The pictures are great.

[ingoo666]

http://img268.imageshack.us/img268/8979/10001966iu.th.jpg (http://img268.imageshack.us/my.php?image=10001966iu.jpg)
http://img410.imageshack.us/img410/5535/10001978yr.th.jpg (http://img410.imageshack.us/my.php?image=10001978yr.jpg)
http://img410.imageshack.us/img410/5535/10001978yr.th.jpg (http://img410.imageshack.us/my.php?image=10001978yr.jpg)

My first post and my first dub sidewall. I think i did pretty good. U guys rate
it. i jus got to break in the pocket now.. eh..

[Mad-Max]

orange, this tut is my personal favorite. its really easy to follow, and now this is the only was I'll string my sticks. THanks a ton for doing this. I'll get a few pics up tommorow or something.

[RichWutLax]

sweet i just strung my profile up like this with the free jima mesh kit that i just recieved in the mail .... looks pretty awesome ill post pics when i go buy some batteries for my camera .

[torquemyheadoff]

Should i double sidewall my torque??

[lVlike]

Should i double sidewall my torque??

It's preference. I personally do have double sidewall on my torque. If you read the thread double sidewall on a torque was discussed already. :chair:

Well first of all, the Razer doesn't have many sidewall holes at all, which is what I personally like about it. The Profile actually has one more sidewall hole than the Razer.

If you wanted to try this on a Torque, it's doable. I would say skip every other sidewall hole when stringing the first sidewall. If that doesn't fit your likings, than you can just redo it however you prefer because of the multiple holes on the Torque.

[mattlax743]

do double sidewalls increase the whip at all? what are the benefits other than it takes stress off from catching the ball which makes your sidewall strings last longer

[mattlax743]

do double sidewalls increase the whip at all? what are the benefits other than it takes stress off from catching the ball which makes your sidewall strings last longer

anybody? anybody?

[Mad-Max]

do double sidewalls increase the whip at all? what are the benefits other than it takes stress off from catching the ball which makes your sidewall strings last longer


the whip issue depends on which diamonds you use in the mesh and how often you double up. a totally whipless stick can be strung with double sidewall. the major benefit of doing it this way is the pocket is much larger overall.

[mattlax743]

alright thanks man. so then this would be a good way to string your pocket for a d-pole?

[Mad-Max]

alright thanks man. so then this would be a good way to string your pocket for a d-pole?


Its all depends on how you string it up, but I string all my sticks like this now and I play defense.

[michiganattack8]

srry if someone allready posted this but are there any other benifits to dbl sidewalls besides getting a HUGE pocket? Also, incrediable job orange. :worship:

[LebanonLAX]

I need help, im a bit confused. My Triton has alot of holes and I dont know which to use.

[Gary Gait]

wow, that is a good tutorial. look at my first stringing thread and compare it to the pics of it with this tutorial.

[CSlax06]

How bout you bring the thread to us?

[Gary Gait]

here:My cruddy first stringing (http://www.lacrosseforums.com/showthread.php?t=74347)
And my camera busted...l'll post the results later when it's fixed.
:thumbsdow

[roswelllax85]

2 side walls what exactly dose that do ?

[DutchyLacrosse]

2 side walls what exactly dose that do ?

It for extra support and if one of the sidewall strings break then there will be one left so that you can continue playing with it.

[BwineLAX42]

It for extra support and if one of the sidewall strings break then there will be one left so that you can continue playing with it.

If the first string breaks you can't keep playing can you?

And I string all my sticks like this.
ALL HAIL ORANGE!! :worship:

[DutchyLacrosse]

If the first string breaks you can't keep playing can you?

And I string all my sticks like this.
ALL HAIL ORANGE!! :worship:

Woops, sorry i didn't look at the actual tutorial.
I thought of double sidewalls as two sidewalls strung into the mesh.
Sorry again, i'm new to stringing.

[laxattack09]

i know you said how to do it but the pic is gone. how do you double up with double sidewalls

[CapitalSDNY]

What are the advantages of using a double sidewall? Is it suppose to curb breakage of the string?

[cali feeder]

You can place your pocket much easier.

[Dub C lacrosse]

Coming from me, im actually quite a pitiful stringer, my pocket looks amazing. Ill send you some thumbnails later. :)

[Chas]

I want to see a triple sidewall.

[Lax Crazy12]

I want to see a triple sidewall.

On e-lacrosse somewhere someone did a quadruple sidewall.

[Orange]

I could do that but it's just kinda overkill. The pocket would look weird/flat rather than defined and nice.

[Titanoh]

What does a double sidewall do? Does it preform better then a single?

[wakypnguindvl66]

i dunno if its already been answered, but is there even a real advantage to doubling sidewalls? i give you rights to flame me if it has been haha

[desmetlaxplyr2]

can u do this with regular sidewall string

[Titanoh]

Yeah, it will just be a little harder to get through the wholes, but its not impossible.

[sk8rpirate]

sweet i just strung my profile up like this with the free jima mesh kit that i just recieved in the mail .... looks pretty awesome ill post pics when i go buy some batteries for my camera .

how did you get the free mesh

[UVA-lax]

How do you get no whip. Everytime I try it gives me A LOT of whip.
And really, I know its been answered, but only breifly. What are all the benefits of double sidewall.

Nice tut. Orange

[dabir93]

I just strung up my Evo pro with double but I just wanted to make sure on the first inner sidewall do you come from the inside of the head with the string and then put it behind or Is that wrong
thanks for the tut orange