mixing brands?

[play2feet17]

are you able to mismatch like different heads to differnt brand shafts. Like a warrior shaft to a brine head and vise-versa. and like STX head to another shaft? I was just wondering thanks. o yea and will any fit without drilling another hole?

[Sticknasty4eva]

yes most all shafts and heads can be mixed some are a tight fit but for the most part they fit.

[mustang_lax]

Yea any shaft can fit in almost any head, except the liquid which a pos anyway so that doesn't matter. I have an Evo on a STX C405 and it fits perfectly

[play2feet17]

alright cause i was going to but i wasnt sure if something like that would work. I was gonna use a warrior shaft on a brine head. or the other way around.

[HRodLAX]

i have a evo pro on a 'nit optra and it fits fine. However, an av8 i have needed some sanding down(wrap a screwdriver sandpaper) before i could fit it on an f10 powergrip i had lying around.

[lax4life6]

Yeah my torque fits on my F15 but needs a piece of tape on teh shaft because the heads bigger than the shaft.

[Thomson#1]

Same with my Torque and my Levi...

[PHSLax]

i have a proton and an ignite optra.. it fits, but tightly. I also needed to drill a hole in the ignite optra.

[BClax17]

My Nitrious on a Harrow fits perfectly

[atacklax]

finalizer on an axe
a bit tight, but its a great fit

[ShermanLax607]

you will most likely need to drill another hole but most fit, some tighter than others like the powergrips

[dpolehh21]

I had to drill a new hole in my 803 to get my revo on it, but my other mismatches fit fine.

[Trilax03]

yeah i made a hole in my brine stick for a warrior head...but they fit fine now