View Full Version : heads!!!!!!!!!!!
laxattack22
07-20-2005, 07:07 PM
i need quick answers...i have a game tomorrow and i am getting a finalizer for the game before i go..but the shaft i have (db803) dosnt have a hole in it...so what i am getting at is..do all warrior heads have a hole in the same place.. i am guessing yes because they are the same brand but because i am not 100% sure because i rarely use warrior i am asking all of you....
PhishMeister
07-20-2005, 07:09 PM
ya thats not necessarily tru bcuz on the brine cyber and answer there holes r different...wen u get it at the store u should check other heads...
PWlaxkyle5
07-20-2005, 07:38 PM
just drill a warrior head on one side and drill a different hole on the other and hopfully one will fit
Orange
07-20-2005, 07:42 PM
Warrior heads have the same hole spots. So if you already have a Warrior head, drill a hole in your 803 for it and the Finalizer will fit it.
lax4life6
07-20-2005, 08:01 PM
most places will drill a hole for you anyways on teh other side. i have like 5 holes in my F15 from putting different heads on it.
laxattack22
07-20-2005, 09:04 PM
i still am questioning that on the newer warrior head's i think that their hole spots are different from the older warrior heads..please correct if i am wrong..
Orange
07-20-2005, 09:13 PM
Well what's the older Warrior head you have? I know for a fact that the Pros, Razer, Finalizer, Evolution, Revolution, and Blade all have the hole in the same spot.
LaXDaVe
07-20-2005, 09:17 PM
The finalizer will be a huge ***** to get on the 803, so slam it on and tape it until you can drill a hole. Trust me, NOTHING, I mean NOTHING fits on an 803, I have it, and a finalizer, doesnt fit. So just pound and tape it up.
hjr432
07-20-2005, 09:18 PM
i definately agree with dave, when i got my evo pro, it took me an hour to get my old head off my 803
LaXDaVe
07-20-2005, 09:19 PM
I had to cut my evo with a knife to get it to fit, lol. I murdered it, but its on there =P
Orange
07-20-2005, 09:20 PM
My 803 fits on my Finalizer pretty easily.
hjr432
07-20-2005, 09:21 PM
whatever works, dave
:thumbsup:
LaXDaVe
07-20-2005, 09:22 PM
Exactly. Thats how it goes. =P
laxattack22
07-24-2005, 09:42 AM
The finalizer will be a huge ***** to get on the 803, so slam it on and tape it until you can drill a hole. Trust me, NOTHING, I mean NOTHING fits on an 803, I have it, and a finalizer, doesnt fit. So just pound and tape it up.
i got the head it went on pretty easily so i dotn knwo what your talking about