change the colour of one side of mesh

[Lax4Ever]

I want to take one colour of mesh, like a red, and have one side white. I was just woundering what I can do that wouldn't make the mesh harder/softer. Would bleech work? Or would it take away the colour from the other side as well?? What other options are there??

[Tman188]

thats illigal, you cant have a 2 colored mesh

[Lax4Ever]

That sucks but I'd still like to do it for fun.

[Superman]

first off its color.. second just buy a peice of white mesh and dye it whatever color

[jaw22]

thats illigal, you cant have a 2 colored mesh

thats not true. Its one color per side.

[spenny]

actually according to a thread in the rules forum, if i remember correctly, you could do that if each side was one solid color.

of course. if some ref sees your stick and says no way, its not going to do you any good that Lax_Ref said its ok here.

[ViennaLAX16]

i went to landon lacrosse camp(i dont go to landon) And there all rich and blow at lacrosse, well there middle schookl does, And this kid had orange and bromn mini mesh channeled together in the center, It was a nasty...as in aweful string job.

[Tman188]

thats not true. Its one color per side.
sorry, my mistake. i misread it.

[laxgoalieking]

first off hes canadian so it is colour.
secondly you can have as many colours you want as we dont use american rules
third bleach, spray paint, and dye you make it harder for some time but would eventualy break in

[slinkyspine]

first off hes canadian so it is colour.
secondly you can have as many colours you want as we dont use american rules
third bleach, spray paint, and dye you make it harder for some time but would eventualy break in
yea dye it what ever you want for box heck dye a white circle in middle for all we care

[lax4life6]

try putting duct tape or something one one side to keep the dye off it then dye it whatever color

[Lax4Ever]

Thanks, I may just do that, lol. It might look pretty good too.

[laxmonk55]

The dye may run trhough the mesh to the other side though as the mesh absorbs the color

[Lax4Ever]

That's the main problem. I kinda want to try using a type of cleaner withbleech in it. Maybe even a spray. Hopefully it will work out if I take my time with it(as in a few days probobly).

[a2lacrosse]

i went to landon lacrosse camp(i dont go to landon) And there all rich and blow at lacrosse, well there middle schookl does, And this kid had orange and bromn mini mesh channeled together in the center, It was a nasty...as in aweful string job.


Oh the landon camp had hopkins players there. there MS teams do tend to stink.

[NY Lax 4]

Get a lot of those little tube like things women put inbetween their toes when they get a pedicure and put it through each hole....you can then spray paint it, i guess

[i live 4 lax]

spray paint would make the mesh ultra hard. like a rock. take a colores piece of mesh and dip one side in bleach.

[ViennaLAX16]

Oh the landon camp had hopkins players there. there MS teams do tend to stink.
ya they had one.....jake bern...He was an arrogant butt hole. But wouldn't you if you won two game with the final goal?

[Lax101]

first off its colorr
No, depends on where you're from. Go to England and tell everyone that they're spelling "colour/color" wrong.

And its ironic that you tried to correct his spelling when you yourself spelled "color" wrong.

[Monkey grass]

How about this. Get a piece of white mesh. Put your dye in a bucket big enough to dip the elongated mesh piece in. Dip it down in halfway like you want. Pull it back out and hang it from the white side to dry. That way the liquid would run downward ala through the already dyed side and it would not run onto the white side. Just a suggestion.

[Lax4Ever]

I want my poket one colour and the outside another. If I do it that way, I'm worried about the dye going through to the other side. So far I think taking my time with some bleach is the best option. When I get a chance to try this out, I'll let everyone know how it turns out and what I had to do. Don't expect it soon though, I fell behind in school and it's going to take some time to catch back up. This is getting put on hold for a bit.

[Steely Dan]

get a really flat baking tray and line it with tinfoil. make up a small amount of dye and pour onto the foil so that its only about 1mm deep. Lay the mesh flat for a few hours (maybe a day? keep an eye on it though) Have no idea if that would work but it might

[LCNlaxman]

Did you think that the color might bleed through all the mesh making one side (let's say you used red) red, and the other a lighter shade of red? I'm thinking that's what would happen if you somehow got it to work in the first place.

[Steely Dan]

might well do, if you use the powder dye though and make it up quite thick so that its almost like paint, it might stop the capilary action that would cause it to bleed through to the other side

[unta8]

you guys, thats how color is spelled in every place in the world besides the US.