ripped mesh

[upstate7lax]

one of the diamonds on the mesh on the side of my lax head is about to rip....anyway to totally fix it....tried tape before, but it usually is just temperary

[MVlax19]

buy new mesh? try to sear it together, i dont know what to tell you

[cwb_lax]

since the season is over....restring it! yay for restringing game sticks now that the spring season is over!

[crazydrew86]

you can just leave it a broken diamond will not really change how the stick throw. im not saying it wont, but its not likely

[K Baz]

If you are about to lose one of the mesh holes that your sidewall is looped through use a zap strap (cable tie - one of those little pastic things to hold cords together with). Just attach it from the sidewall to the next mesh loop in and adjust the tightness (as desired) and snip off - quick simple and cheap. If it is one of the other mesh holes no worries shouldn't bother unless it is like 6 D or some other large gauge.

[JaxLax30]

There really isn't a sure way to fix it. But whatever you do DON'T BURN IT TOGETHER. It makes the mesh weaker.

[Buzz1991]

Just tie it together w/ crosslace. Thats what I did and there is no noticible difference.

[Solstice]

if the mesh is starting to rip, i think its time to replace it. buy a new piece of Jimalax mesh and string it in there. maybe even a whole kit. i've had tons of friends who have tried to fixed ripped mesh, and eventually it comes un-done or rips in another spot. the best solution is to take it out and replace it.