New shaft

[CnSLax3]

I just got a KryptoPro for my Evo Pro and it came with two holes in it (no surprise) so because I like my shaft a littlle longer felling i put it into the first hole (Is that illegal?) and it wobbles abit, will this effect its consistancy?

[ekajsk8er]

Eh, it shouldn't, but it can get annoying. If you wrap a layer of tape around the shaft, than put the head on the shaft over the top it should cut down on the wobbling.

[Formerlaxdemon]

CnSLax3, you really need to have the head all the way down on the shaft, that is why there is a hole lower down on the shaft. By placing your head in the uppermost hole, you probably have a crosse that is too long for legal field play. You also risk breaking your head sooner since having nothing but air and plastic for about half an inch- that's not a good idea.

[goalie1215]

make it so the head is pushed up all the way onto the shaft. the reason for this is if you catch a hard pass on the throat it will crack. overall you are better off putting it all the way on.

[CnSLax3]

Ok thanks I'll just move it down.

[MACDADDY]

ahhhh thats where ducktape comes in with the shaft. i did it with my kannon/crankshaft because the neck is so small. after i put tape on it, it doesnt wabble. its acutally all mental because it doesnt really matter if it wabbles a bit

[laxin21]

it matters if it wobbles becuase that means the shaft is wearing the plastic down inside the throat making it more likely to break

[laxinkid93]

yeah it can brake your head really easily