Mesh Problem

[Adrenaline]

All my mesh pockets get the ball stuck at the bottom because of the sidwall strings, wat should i do about it.

[plaidpenguin]

try to losen the strings or make the pocket higher.

[dta06]

sounds like your head got warped. that happened to me. just stick a baseball where the ball wont fall out overnight

[laxin21]

that happened to me once b/c i pinched the head and the throat got too pinched. If theres 2 holes near eachother at the bottom, tie off on the first hole, that helped me in my old matrix

[kingdawgell]

if there are two holes real close to eachother at the end of the sidewall, go from the outisde in on the first one, then out through the second hole. that should prevent the ball from catching

[subterFUSE]

Make sure that the mesh is on the outside of the sidewalls, not the inside. If it's inside, it can pinch the ball and make the pocket illegal.

[coqlax02]

instead of having the strings on the inside put them on the outside... dont know if you will know what i am talking about but some ppl put them on the inside to get it caught on purpouse when you put the string through the holes go from the outside in and it might help

[Adrenaline]

Thanks for ur help guys.