is the x3 non offset

[dubclax17]

is the x3 a non offset head?

[SilverZeppelin]

its meant to be used with the cs 10, and i think if you put it on a normal stick it would be a "reverse" offset

[dubclax17]

its meant to be used with the cs 10, and i think if you put it on a normal stick it would be a "reverse" offset

what dose reverse offset mean?
and kool your from livermore like 40 minutes away from there

[SilverZeppelin]

where you live?

anyway, i think the head is designed so that it cancels out the 10 degrees. in other words, it is "offset" forward. its not meant to be used with anything but a cs 10

[Riot]

It's sort of like this -
http://img264.imageshack.us/img264/2787/x236vu.jpg

[SilverZeppelin]

It's sort of like this -
http://img264.imageshack.us/img264/2787/x236vu.jpg
exactly right

[faceofflax15]

So technically, The x3, k18 and Kannon are the only heads known that are 'Onset', The bend foward, and the shaft bends down.

[Riot]

So technically, The x3, k18 and Kannon are the only heads known that are 'Onset', The bend foward, and the shaft bends down.
I think there are a couple older heads that are "onset" (I know it's not actually a term, but we all know what it means), but basically, yeah.

[faceofflax15]

I think there are a couple older heads that are "onset" (I know it's not actually a term, but we all know what it means), but basically, yeah.
Onset means bending forward.
Offset means bending down
Straight means..Straight..

I don't know of any other Onset heads.

[Riot]

Onset means bending forward.
Offset means bending down
Straight means..Straight..

I don't know of any other Onset heads.
Yeah, I know. I think it was 3pp that pointed out that offset just means off centered, so technically a stick that is bending forward is offset too (or something like that), but whatever.

I'm pretty sure there are one or two heads that started out offset and ended up onset.

[faceofflax15]

Yeah, I know. I think it was 3pp that pointed out that offset just means off centered, so technically a stick that is bending forward is offset too (or something like that), but whatever.

I'm pretty sure there are one or two heads that started out offset and ended up onset.
Hmm, Didn't knwo, If you could show me a link or somthing that be great.

[Riot]

Hmm, Didn't knwo, If you could show me a link or somthing that be great.
I actually don't remember which heads they were.. Spenny or somebody like that probably does.

[ftDpole35]

i think that the bionic can go on the cs2 and still be legal. but im not 100% sure

[Riot]

i think that the bionic can go on the cs2 and still be legal. but im not 100% sure
No, it can't.

[Lax101]

i think that the bionic can go on the cs2 and still be legal. but im not 100% sure
The bionic is actually one of the two normal STX heads that is illegal with the CS2, because the ballstop is tilted offset.

The CS2 is compatible with any STX head besides the Primer, Bionic, and any crankshaft specific head.

[ftDpole35]

The bionic is actually one of the two normal STX heads that is illegal with the CS2, because the ballstop is tilted offset.

The CS2 is compatible with any STX head besides the Primer, Bionic, and any crankshaft specific head.

oh, i get it. thanks for that

[spyopticgoggles]

the X3 is straight, i just put it on my regular handle and its straight

[manup5183]

after a lot of FO's with a striaght head, the will become onset

[Riot]

the X3 is straight, i just put it on my regular handle and its straight
No it's not.

[EHSLAX12]

it is definetely not straight...there must be somethin wrong with your brain if its straight.