screw..

[QnzLaxStatz]

i cant get my screw out of my stick...i no i saw a thread on this but cant find it now...it turns but wont come out..please help..srry mods if there is a thread like this..

[EHSLAX12]

take the throat of the head and hold it under really hot water for a few minutes, then try getting it out.

[Laxmann019]

Maybe the screw is stripped? do what EHSlax said and see if it works

[L4X_M4ST3R]

magnetize a screwdriver and/or use one that is magnetized its happened to me manny times

[MaKiMaKi13]

he stripped the screw hes not having problems getting the head off

but yea what L4X_M4ST3R said should work i forgot what else you can do

[laxchance9871]

your hole might be messed up, so u can either pry it out or just use the magnetized screw driver.

[LaxMaxVince]

Are you having the problem where you keep turning it and it turns and doesnt come out?

Happened to me. Dont worry, its just too small, or its stripped.

Ok, you might need a set of extra hands for this but... as you unscrew it, get some pliers and yank it out as youre unscrewing.

[Orange]

Pull the head as if you were trying to pull it off the shaft but not so hard, just so it gets tightened up. Then try to unscrew the screw.

[orangeman17]

pry with a flathead as you are twisting the screw

[george]

ok that happends to me some times
ok start un scruewing it than pry it up with a flat head screw driver