Triumph question(s)

[Vermont Laxer]

1) i am looking at getting one of these helmets but i have heard of fitting problems what size head will fit in an L/XL i can wear a size 7 3/8 hat and it not uncomfortable if that helps
2) if i wanted to order colors of the helmet say from comlax or lax.com are you allowed to order just one because i know brine with other equipment that its speaclized you have to order 24 ex. gloves

[dta06]

What size are you in different helmets. If you are a s/m in a cascade helmet, you will definitely need a L/XL on the triumph.

[Vermont Laxer]

is that the biggest size? i wear a large i belive in cascade its alittle loose on my head though

[Vermont Laxer]

just measured around my head 23inches so wat size helmet?

[dta06]

just measured around my head 23inches so wat size helmet?
definitely a L/XL

[minimiddie19]

you can order just 1 in custom colors from lax.com that's what i did.

[Vermont Laxer]

for the helmet stickers i was just going to take my old logos of my other helmet but how would i get the other stickers to the brine helmet?

[lax33]

i wear the same size hat as you and the L/XL fit me pretty good

[Vermont Laxer]

How do you get the right decals for the Brine helmets??

[VENOMKEEPER]

Hey guys I have a question. I played a few outdoor games with my Triumph and for some reason the knob on the back of the helmet sticks and is very hard to turn. Anyone have this problem and if so what do you do about it?

[dta06]

Hey guys I have a question. I played a few outdoor games with my Triumph and for some reason the knob on the back of the helmet sticks and is very hard to turn. Anyone have this problem and if so what do you do about it?
I had the same problem a few times. It happens when you make the turny thing too tight for a long time. It should get back to normal after a while.

[VENOMKEEPER]

Anything I can do to loosen it up? It barely moves right now. WD-40?

[VCULAX1]

does anyone know if cpx helmet decals fit the triumph, i.e. the back and top vent strips??

[MACDADDY]

what i dont get is why brine makes a helmet that can form the exact shape of any head with the knob, and yet, they make the helmet too small for most people. why not just make a size comparable to the CPX or CPro and a knob.

[brainddeadjock]

I wear a 7 3/8 hat and can't get a CPX to fit. Mine had to be custom sized from cascade. I can't get a triumph on my head past my ears.

Regarding the ordering of a custom helmet, any store can get you an order of one helmet, the decals are another matter. I think 12 is the min. No decals from any other helmet will fit the triumphs vents, not even the Trand XP3. It is a new hole pattern and shell. Your SOL.

[LaxStar123]

you should order directly from the company its much easyer and i have a big head and it fits nice

[dta06]

does anyone know if cpx helmet decals fit the triumph, i.e. the back and top vent strips??
I don't know about the back, but the vents definitely cant fit.

[LPLAX13]

get the triumph i have one and it is the most comfortable i have had but it is also just my second but i have tried on a lot