help stringing a bring pulse!!

[Mr. Raw]

my friend just gave me a brine pulse to string up for him but after looking at it i have no idea what to do. the stringing holes are in such odd positions i cant figure out where i should double up and which holes (if any) i should skip. typically im really good at stringing mesh (its 10D by the way) but this sure has got me stumped! any help would be greatly appreciated. im trying to make a mid / mid-high pocket. thanks again!

[CustomX157]

double up toward the beginning and toward the middle. Should turn out all right.

[gtodude]

this is a dumb question but what does double up mean? ive been stringing for years and i never hear that term, im sure ive done it before but it was called something else. i just want to know what doubling up is so i know if its different.

[ATXlacrosse]

this is a dumb question but what does double up mean? ive been stringing for years and i never hear that term, im sure ive done it before but it was called something else. i just want to know what doubling up is so i know if its different.
http://www.lacrosseforums.com/showthread.php?t=57523

[laxman01]

http://www.lacrosseforums.com/showthread.php?t=57523

You can double up not interlocking too...
It's just when you put the sidewall string through two diamonds of mesh then through the sidewall hole on the head.

[ATXlacrosse]

You can double up not interlocking too...
It's just when you put the sidewall string through two diamonds of mesh then through the sidewall hole on the head.
From my exprerience the stringing turns out alot better if you interlock with a pulse.

[Lax4life528]

http://www.lacrosseforums.com/showthread.php?t=57523

I find that doubling up works better with double side wall. I don't like to double that way.