Help

[mwlax21]

ok im trying to dye a head with letters on it but the stickers keep on falling of in the dye. what should i do

[baseballsucks]

heat them up with a hairdryer or the stove dont touch the burner but use the heat that comes off of it

[mwlax21]

i tried that and they still came off

[baseballsucks]

then put hot glue around the edges of them (if you have tried that then there is nothing else to do)

[MaKiMaKi13]

hot glue in addition to the hair dryer , you may also need new stickers since most of the adhesive is probably already gone

[mwlax21]

if i put in the stove how long should i leave it for

[MaKiMaKi13]

do you mean like boiling the water before you added the dye?? if so its until it boils and then you can continually check on the head until you get it the desired hue

i like to do it outside so i dont end up staining the house if i mess up

[tiplax]

what kind of stickers are you useing?
some stickers just won't work in dye

[baseballsucks]

your thinking about the oven, the stove is where the four eyes are. with the stove you simply just put the stick over the burner not allowing it to touch but to heat it up from the heat it produces.

[mwlax21]

ok well i just tried putting it in the oven and still didnt work so i think im gonna give up

[Lacrossebum03]

I do the blow drier/Heat gun, push realll hard on the stickers, blow dry/ heat gun again, check it all out, dye, done. The stove sounds like a good idea, but if you get a high powered hear gun, you're set.

[mwlax21]

alright thanks lacrossebum, did you ever finish that one dye