dyeing my name on to my head ( sugestions )

[Str8ballin]

Ok, I figured i could just tape up my stick except my name so when i die it my name is the only thing that shows up, but i can't seem to cut the tape the way I want. Any sugestions, on tape i should use, or how i should do this in general. If your wondering I have died heads before.

[nd_lacrosse]

you can go to a craft store and buy letter stickers. im sure they have them in a variety of shapes styles and sizes.

[aviator]

SDL next time



But my suggestion would be lay down the letter stickers how you want them on a peice of tape, exacto them out so you have them as holes. Then put it on the scoop and glue up the rest of it. Good luck

[itsthatkid]

Instead of hot glue he whole head, i would use the aluminum cup method. I think its showed on laxnation

[cali feeder]

Instead of hot glue he whole head, i would use the aluminum cup method. I think its showed on laxnation

That's a LOT harder to pull off than it looks. I'd actually tape the whole top of the head, and use the stickers and an exacto knife to cut out the letters.

EDIT: And, obviously, only insert the taped portion of the head into the dye. I'm sure you can figure out some way to suspend the head above the water at the right height.

[bellies_lax_17]

If you do use the method Cali mentioned, make sure you cover enough of the head to block against the bubbling dye (ie. water splattering).